DD Optics Nighteagle 2,5-15x50 Riflescope

DDoptics V6 2.5-15x50 NFX rifle scope: new model with a wider field of view.

V6 6x zoom
Metal reticle adjustment turrets (no plastic)
CT glass (Clear Transmission) (low dispersion)
Dual scale (Doubleturn)
Zero stop for quick reticle adjustment (stop at zero)
New magnification ring design
New Reticle 4 (A4N) with significantly finer posts
Firm tactical 0.1 MRAD clicks (1 cm/click)
Adjustment range 184 clicks = 1.84 m at 100 m

New features

What is new in the latest generation of rifle scopes?
At first glance, 3 changes stand out:
1. The magnification ring has been noticeably redesigned, with a coarser texture for better grip.
2. Reticle 4 is significantly finer, leaving more space in the centre.
3. The reticle adjustment is made of metal, has more clearly defined clicks and features Doubleturn and zero stop.

Robust adjustment mechanism for demanding use

The adjustment turrets on DDoptics Generation III rifle scopes are made of a robust aluminium alloy, with no plastic components. All aluminium parts have the new non-reflective DDoptics "fine-black" anodised finish. The mechanism has been upgraded to the Tactical version: it is highly shock-resistant and completely waterproof, with firm adjustment that helps prevent accidental changes. The turrets can therefore be used exposed, without their screw caps, during everyday hunting, allowing rapid adjustment to suit the situation.

Quick reticle adjustment with zero stop

A dual scale (Doubleturn) on the elevation turret allows you to read and set the number of adjustment clicks.
After sighting in, the reticle adjustment can be reset to zero. The zero-stop ring is then turned as far as it will go and tightened from below to create a stop at the zero position. Starting from zero, and provided the ammunition load is known, a marking system allows different shooting distances to be preset. The windage turret has two scales running in opposite directions. Starting from zero, the reticle can be adjusted for wind direction and strength or for movement of the target.

New Reticle 4 for minimal target coverage

Looking through the new Generation III Nighteagle HDX rifle scopes immediately reveals their practical design:
The crosshair in Reticle 4N is much finer, while the originally thicker outer posts are now only half as thick and spaced significantly farther apart. This is a major advantage for hunters in poor light: the target is only minimally obscured, supporting fast and confident aiming.

The illuminated Reticle 4N is in the eyepiece focal plane (second focal plane), so its apparent size stays the same as magnification changes. No tools are needed to adjust the reticle. The scope has tactical 0.1 MRAD adjustment: each click moves the reticle by 0.1 MRAD, or 1 cm at 100 m. This makes it straightforward for European users to work with the decimal system. The click adjustment is fully repeatable and can be reset to zero after sighting in when using different ammunition loads.

The side-mounted, continuously variable parallax adjustment (20 yards to infinity) prevents errors caused by off-axis viewing and provides a pin-sharp, fatigue-free image at every magnification setting.

Tecnical data :

Diopter adjustment: -3 to +3
Enlargement: 2,5-15x
Weight in grams: 712
Type of optics: Rifle scope
Twilight number: 11,2-27,4
Generation: 3
Compensation: DDlucid
Lens diameter lens in mm: 50
Exit pupil in mm: 11,6-3,4
Field of view at 100 m (in m): 15-2,5
Interpupillary distance in mm: 85-99
Reticle: New reticle 4
Luminescent point II: yes
Reticle focal plane: 2nd focal plane
Reticle adjustment / click: 0.1 MRAD
Reticle adjustment (scaling): double
Max. adjustment range: 18,4 MRAD
Parallax compensation: 20-500-infinity
Surface: fine black
Center tube diameter in mm: 30
ASV zero stop: yes
Lens diameter outside in mm: 58
Eyepiece diameter in mm: 43,5
Total length in mm: 376