DD Optics V10 2-20x50 NXT Riflescope

Compact Reach for Twilight and Long Distances
The DDoptics NXT V10 2–20×50 combines tenfold zoom with a body just 318,69 mm long. From a clear overview at 2x to precise detail at 20x, it remains versatile for stalking, high-seat hunting and longer hunting distances.

The bright 50-mm objective, CT glass and low stray light deliver a high-contrast image. The fine A4N reticle and manually controlled fibre-optic dot support clear, controlled target acquisition. The hunter switches the dot on and off and sets the brightness directly.

Super-Short Design for Thermal Clip-Ons
At just 318,69 mm long, the scope leaves valuable space on the rifle for a thermal clip-on. Its short design avoids unnecessary overall length and helps maintain balanced handling.

Parallax adjustment allows clear focusing of the clip-on image as magnification increases. The NXT V10 thus combines a compact clip-on setup with the reach of a full-featured 2–20×50.

Parallax Adjustment from 15 Metres and Internal ZeroStop
Parallax adjustment from 15 metres to infinity enables precise focusing and a parallax-free sight picture, especially important at 20x magnification and when using a clip-on.

The 0,1-MRAD click adjustment provides distinct 1-cm increments at 100 metres. The internal ZeroStop gives a clearly defined stop when dialling back to zero.

Mounting Advice for the 30-mm Main Tube
Tighten the mounting rings evenly and follow the mount manufacturer's instructions. Tightening torque on the riflescope must not exceed 2,0 Nm.

Position the front ring as far forward as possible on a free cylindrical section of the main tube, leaving sufficient clearance from the turret block. This avoids stressing the tube around the parallax mechanism. Use additional adhesive only if suitable and in accordance with the mount manufacturer's instructions

Short Setup with a Thermal Clip-On
Despite its 20x maximum magnification, the compact scope leaves ample space for a clip-on. Parallax adjustment helps focus the display image precisely at close range and at higher magnification.

Technical Specifications
Magnification 2–20x
Objective diameter 50 mm
Field of view at 100 m 18,5–1,8 m
Exit pupil 11–2,5 mm
Dioptre adjustment ±3 dpt
Main tube diameter 30 mm
Parallax adjustment 15 m to infinity
Reticle / focal plane A4N / second focal plane
Illuminated dot manually controlled fibre-optic dot
Click adjustment 0,1 MRAD (1 cm at 100 m)
Adjustment range / ZeroStop 42 MRAD / yes
Coating CT glass (Clear Transmission)
Outside diameter: objective / eyepiece 57 mm / 46 mm
Overall length / weight 318,69 mm / 680 g